精品1区2区3区芒果,奇米成人影院777欧美极品,现在正在分手中在线观看

新聞

聯系方式

服務熱線：0531-85980985　

聯系人：寧經理
手機：13953116782
電話：15990999232
郵箱：499589624@qq.com
地址：濟南市槐蔭區清河北路11號（美里新居南門斜對面）亞德森工廠店

工作服裁剪工藝要求？

來源：http://www.filleclair.com.cn 日期：2021-05-26 發布人：

裁剪前要先根據樣板繪制出排料圖，“完備、合理、節省”是排料的基源頭根本則。在裁剪工序中緊張工藝要求如下：

Before cutting, it is necessary to draw the layout map according to the template, and "complete, reasonable and economical" is the basic principle of layout. In the cutting process, the process requirements are as follows:

（1）拖料時點清數量，過細避開疵點。

(1) When dragging materials, check the quantity and avoid defects.

（2）對付差異批染色或砂洗的面料要分批裁剪，警備同件梳妝上出現色差征象。對付一開端猜中存在色差征象的要舉行色差排料。

(2) To deal with the fabric dyed or sand washed in different batches, it is necessary to cut it in batches to guard against the appearance of color difference on the same dressing. To solve the problem of color difference in the beginning, we should arrange the color difference.

（3）排料時過細面料的絲綹順直以及衣片的絲縷偏向是否切合工藝要求，對付起絨面料（比方絲絨、天鵝絨、燈芯絨等）不行倒順排料，否則會影響梳妝顏色的深淺。

(3) When arranging, whether the grain of too fine fabric is straight and whether the thread deviation of the garment piece meets the process requirements, it is not allowed to arrange the material in reverse order for velvet fabrics (such as velvet, velvet, corduroy, etc.), otherwise it will affect the depth of the dressing color.
濟南工作服定做

（4）對付條格紋的面料，拖料時要過細各層中條格對準并定位，以包管梳妝上條格的連貫和對稱。

(4) For the fabric with stripe pattern, it should be too thin when dragging, and the stripe in each layer should be aligned and positioned to ensure the continuity and symmetry of the stripe on the dressing.

（5）裁剪要求下刀準確，線條順直流暢。鋪型不得過厚，面料上下層不偏刀。

(5) Cutting requires accurate cutting and smooth lines. The laying type shall not be too thick, and the upper and lower layers of the fabric shall not be skewed.

（6）根據樣板對位暗號剪切刀口。

(6) Cut the knife edge according to the template alignment code.

（7）接納錐孔標志時應過細不要影響成衣的表面。裁剪后要舉行清點數量和驗片事情，并根據梳妝規格分堆系縛，附上票簽注明款號、部位、規格等。

(7) The taper mark should be too thin to affect the surface of the garment. After cutting, count the quantity and check the film, and tie them according to the dressing specifications, and attach the ticket to indicate the model number, position, specification, etc.

上面就是小編給大家講解的內容了，相信大家都有所了解了吧！希望大家在訂購工作服同時，能夠參考以上的內容選擇哦！！！如想了解更多精彩資訊歡迎點擊我們的官網：濟南工作服定做http://www.filleclair.com.cn。

The above is the content of Xiaobian's explanation to you. I believe you all know it! I hope you can refer to the above content when ordering work clothes!!! If you want to know more wonderful information, please click our official website: Jinan work clothes customized http://www.filleclair.com.cn .

上一條：濟南職業裝淺談職業女性著裝四講究！ | 下一條：大學生如何選擇一套西裝？

搜索

工作服裁剪工藝要求？

來源：http://www.filleclair.com.cn 日期：2021-05-26 發布人：

資訊MORE+